HDMI-CEC messages reported by Pulse-Eight USB-CEC Adapter when pressing the buttons on Samsung BN59-01268D infrared remote control. Tested on Samsung SmartTV LT27H390S, software version 1280.5, connected to PC via HDMI1. USB-CEC Adapter firmware v9, libCEC v4.0.3, configured as Recording device. Author: Michael Miloslavsky, February 2020. REMOTE CONTROL KEY USB-CEC ADAPTER MESSAGE POWER 0f:36 SOURCE None until some input selected 1 01:44:21 2 01:44:22 3 01:44:23 4 01:44:24 5 01:44:25 6 01:44:26 7 01:44:27 8 01:44:28 9 01:44:29 0 01:44:20 TTX/MIX None PRE-CH None VOL+ None VOL- None MUTE None CH LIST 0f:82:00:00 (making TV (0) the active source) CH UP 0f:82:00:00 (making TV (0) the active source) CH DOWN 0f:82:00:00 (making TV (0) the active source) SETTINGS None HOME None GUIDE 0f:82:00:00 (making TV (0) the active source) REC None INFO None UP 01:44:01 DOWN 01:44:02 LEFT 01:44:03 RIGHT 01:44:04 ENTER 01:44:00 RETURN 01:44:0d EXIT 01:44:0d RED (A) 01:44:72 GREEN (B) 01:44:73 YELLOW (C) 01:44:74 BLUE (D) 01:44:71 PIC SIZE None PICTURE None AD/SUBT. None STOP 01:44:45 REWIND 01:44:48 PLAY 01:44:44 PAUSE 01:44:46 FAST FORWARD 01:44:49 All responses except 0f:36 are followed by 01:45, which means "key released".